41
5 Maintenance and cleaning
Install and remove sensor
1. Disconnect the power supply.
2. Disconnect the electrical cable at the terminal box and make a note of
the cable route for later installation.
3. Undo and remove the nut
(3)
.
4. Remove the sensor
(2)
.
5. Install the parts in reverse order.
Note for installation:
The spacing between the switch surface
(4)
and sensor
(2)
must be
2 - 4 mm and can be adjusted using the nut
(1)
.
Warning!
Risk of injury due to high component weight
Raise the vibration screen and vibrator with support.
