23
Screw drive automatic start/automatic clear
If an excessive load makes it difficult for the screw drive to start,
the controller will switch to "Breakaway mode". The screw will
change direction several times. If the screw is unable to break
away by this action, the drive motor will be shut down automatically.
The following message is shown in the display:
Spreader stopped
Spreader blocked
Warning!
Risk of injury by unexpected starting of the screw or
spreading disk
Switch off the spreader to rectify the fault.
Warning!
Risk of falling
Do not climb onto the edge of the tank.
Caution!
Risk of equipment damage
Components of the spreader may be damaged when loosening
the spreading material.
You should therefore loosen the spreading material carefully,
without using sharp or unsuitable tools such as a crowbar.
3 Operating the POLARO
®
L/XL
