26
Press the key to start the calibration.
The calibration will stop automatically
after 60 seconds.
Calibration 60 sec
Screw
80 rpm
3. Weigh the discharged material.
4.
Repeat the calibration if necessary until you find a suitable screw
speed.
Determining the spreading width
1.
Spread on a firm surface.
2. Sweep up the spreading material into a strip lateral to the direction of
travel and assess the side distribution.
Formulas
Discharge volume in kg/min
x
60
= Speed in km/h
Output in g/m²
x
Spreading width in m
Discharge volume in kg/min
x
60
= Output in g/m²
Speed in km/h
x
Spreading width in m
Output in g/m²
x
Speed in km/h
x
Spreading width in m
= Discharge volume in kg/min
60
3 Operating the POLARO
®
L/XL
