34
Drive motor
The drive motor of the spreading disc should be cleaned and greased
at the end of the season. This extends the service life of the motor.
Carry out the maintenance work correctly, otherwise the manufacturer's
warranty may be invalidated.
1. Disconnect agitator plug.
2. Loosen screw
1
on spreading disc
2
and pull spreading disc
2
up
and off.
3. Remove plastic washer.
4. Remove screws
3
from below and remove drive motor
4
with spacer
and two guide rails
5
.
5. Take spacer ring with shaft seal off the motor shaft.
6. Clean motor shaft and contact surface of plastic washer and apply
thin coat of standard copper paste.
7. Fit parts in reverse order.
During the season, the drive motor and the agitator motor must be
lubricated. A grease nipple for each is located on the front plate
(drive motor) and hopper (agitator motor).
5 Maintenance and cleaning
