29
4 Settings and displays
Sensor signal
1. Secure the sensor in the joint area of the lower link.
2. Secure the magnetic encoder to the lower link.
3. Set the position of the sensor and the magnetic encoder.
Maximum distance 10 mm.
•
Hydraulics lowered:
Sensor not in field of magnetic encoder.
Hydraulics at the height where the slide should close or open:
Sensor just reaches field of magnetic encoder.
•
Hydraulics lifted:
Sensor must still be in field of magnetic encoder. When the
hydraulics are lifted, the sensor must not leave the field of the
magnetic encoder, as otherwise the slide will open again.
Please note that the contact surfaces 1 of the sensor are only located on
the left and right sides.
1
1
