33
1. Disconnect agitator plug.
2. Unscrew upper and lower knurled screws
1
on both sides.
3. Remove the hopper
2
.
4. Unscrew knurled screws
3
and take off cover plate
4
.
5. Unscrew the nuts
5
using a 17 mm spanner.
6. Remove hopper platform
6
and pull dosage slider
7
out from the top.
7. Clean the slide unit with a brush or compressed air.
8. Fit parts in reverse order.
Standard lubricant can be applied to the bottom edge to assist with
hopper installation.
5 Maintenance and cleaning
