2009-2013
FLH
RENEGADE
LIGHTS AND WIRING CONTINUED
29
Renegade Wiring Harness
1.
See Fig.’s 1-2.
Attach wiring harness to body
clips on underside of body. The
Purple
turn sig-
nal wire will go to the LH side. The
Brown
turn
signal wire will go to the RH side.
2. Connect 8 position connector on wiring harness
(Fig. 3)
to OEM harness, located under rider
seat at rear of OEM frame.
3.
See Fig.’s 4-5
. Before connecting license plate and light bar (optional) to harness, terminals and
connectors will need to be installed to each before connecting to wiring harness. Use appropriate
tool for crimping terminals to wires. (Mac Tools– TCT1028, Blue Point– PWC47 or H-D 41609).
4. See Fig. 5. Inspect crimps before installing into connector. Distortion should be minimal.
8-position connector on wiring harness-main
6-position connector on wiring harness for trailer
Fig. 1
Body clips
Light bar
connector
on RH side
Taillight connector
Fig. 2
Body clip
License plate connector
Fig. 3
Fig. 4
Male terminal
Female terminal
Fig. 5
Wire core crimp
Insulation crimp