2009-2013
FLH
RENEGADE
12.
See Fig. 10
. Remove RH front plate hardware
and install tapered washers (S001784) into
holes on RH side before installing brace.
13. Bolt rear half of differential brace to housing
using bolts (CB1939).
14.
See Fig. 11.
Bolt front half of differential brace
to top of swingarm gusset with a 3/8” x 1” bolt,
flat washers and lock nut.
Note: Do not bolt down brace until belt ten-
sioning is completed.
15. Tighten bolts in following order:
a. Front half of brace to swingarm gusset.
Torque bolts to
35 ft. lbs.
b. Rear half of brace to differential housing.
Torque bolt to
25 ft. lbs.
c. Torque LH front plate bolts to
17 ft. lbs
.
DIFFERENTIAL CONTINUED
17
Fig. 7
Fig. 8
Tapered washers
