2009-2013
FLH
RENEGADE
Note: Be sure you have correct model year res-
ervoir extension pack before proceeding
(Reminder: packs are labeled 1997-2007 and
2008+).
5.
See Fig. 3
. Remove original master cylinder
reservoir cap screws and discard. Install ex-
tension to master cylinder with new extension
screws.
Do not over tighten extension
screws
.
Note: Verify all brake lines and hardware are
tight before bleeding system.
6. Add brake fluid (refer to OEM reservoir cap for
brake fluid requirements) to brake system and
work brakes to fill lines.
7. Remove rubber caps on bleeder valves. Install
clear brake bleeder hose over bleeder valve on
caliper.
8. Pump brake pedal to build hydraulic pressure.
9. While holding the brake pedal, open bleeder
valve to release pressure and remove air from
system. Repeat bleeding on both calipers until
fluid is solid without bubbles in bleeder hose.
10. Tighten bleeder valves and check for leaks.
11. Install master cylinder reservoir cap with new
screws.
Do not over tighten cap screws.
Park Brake Assembly
1.
See Fig. 4.
Install park brake cable to caliper
brackets. Secure cable to bracket with cir-clip
provided on cables.
BRAKE SYSTEMS CONTINUED
20
Fig. 4
Attach cable
Secure to bracket
Fig. 3
Supplied cover screws
Extension screws (2008+ pack)
