35
_________________________________________________________________________________________
16. REPAIR INSTRUCTIONS
16.1 Welding
All load carrying steel parts are manufactured from S420MC EN10149 sheet and
S420MH/S355J2H EN10219 tube.
Welding repairs are only allowed to be carried out by professional welders. When welding,
use only methods and additives suited for above mentioned steel qualities.
SFS EN-ISO 5817 quality level D of imperfections in welding is suitable for all weldings,
except for load carrying parts. Repair weldings in load carrying parts can be performed only
by permission from the manufacturer.
ATTENTION! It is not allowed to change the construction and structure of this access
platform without written permission from the manufacturer.
17. INSTRUCTIONS FOR TEMPORARY STORAGE
-
The cable of the
+
pole of the battery should be disconnected, if the access
platform is being stored for a period longer than 1 month
-
The machine shall be covered and, if possible, stored inside or under roof in
a place where unauthorized persons don’t have access.
-
Make sure that eventual leaks during storage will not cause waste water or
similar environmental problems.
ATTENTION!
See also engine manufacturer’s instructions for the storage of the
engine.
