LEGRAND Trimod MCS 10 User Manual Download

Page: 29 / 60

Trimod MCS

ser manual

MAIN PAGE

DATA DISPLAYED

5 load availability on output

1st line: Operating status of the EPS. If the text alternates "TRIMOD MCS”

and “EPS in stand-by”, the output is disabled

2nd line: Phase L1 - power in kVA or in W compared with the rated power or

current compared with the rated one and relative percentage

3rd line: Phase L2 - power in kVA or in W compared with the rated power or

current compared with the rated one and relative percentage

4th line: Phase L3 - power in kVA or in W compared with the rated power or

current compared with the rated one and relative percentage

6 measurements on output

1st line: Operating status of the EPS. If the text alternates "TRIMOD

MCS” and “EPS in stand-by”, the output is disabled

2nd line: Output L1 phase: Voltage, current and active power

3rd line: Output L2 phase: Voltage, current and active power

4th line: Output L3 phase: Voltage, current and active power

7 output line voltages

1st line: Operating status of the EPS. If the text alternates "TRIMOD

MCS” and “EPS in stand-by”, the output is disabled

2nd line: line voltage between L1 and L2 on output

3rd line: line voltage between L2 and L3 on output

4th line: line voltage between L3 and L1 on output

8 measurement on input

1st line: Operating status of the EPS. If the text alternates "TRIMOD

MCS” and “EPS in stand-by”, the output is disabled

2nd line: Input L1 phase: Voltage, current and active power

3rd line: Input L2 phase: Voltage, current and active power

4th line: Input L3 phase: Voltage, current and active power

9 bypass line voltages

1st line: Operating status of the EPS. If the text alternates "TRIMOD

MCS” and “EPS in stand-by”, the output is disabled

2nd line: Line voltage between L1 and L2 of bypass line

3rd line: Line voltage between L2 and L3 of bypass line

4th line: Line voltage between L3 and L1 of bypass line

10 battery status

1st line: Operating status of the EPS. If the text alternates "TRIMOD MCS” and

“EPS in stand-by”, the output is disabled

2nd line: voltage, charging current (negative value when charging in

progress, positive value when the batteries are powering the

equipment)

3rd line: battery capacity percentage compared with the nominal percentage,

time remaining, total autonomy time

4th line: battery status:

- Battery Stand-by

- Discharging

- Reserve autonomy

- End autonomy

- Charging - ph1 - battery recharging status (current limitation)

- Charging - ph2 - battery recharging status (voltage limitation)

- Charging - maint: Battery recharging in maintenance mode

- Charging - float.: Battery charging in floating mode

- Testing batteries: Battery test in progress

- Equaliz. batteries: Battery equalizing in progress

- BATTERY FAULT: battery voltage less than 100 V

- MaxTime on Battery: End of the maximum set time for battery

mode operation

Charging -maint

Summary of Contents for Trimod MCS 10





























































Search results

Summary of Contents for Trimod MCS 10

Reviews:

Related manuals for Trimod MCS 10

Brands by name

Popular brands

LEGRAND Trimod MCS 10, User Manual

Search results

Summary of Contents for Trimod MCS 10

Reviews:

Related manuals for Trimod MCS 10

Brands by name

Popular brands