- 9 -
Chapter 2
Preparations & Installation
Physical Installation Requirement
This chapter illustrates basic installation of Wireless Access Point (“
Access Point
” in the following
term)
Network cables. Use standard 10/100Base-TX network (UTP) cables with RJ-45
connectors.
TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem
Administration Interface
LEGRAND Access Point provides GUI (Web based, Graphical User Interface) and utility for machine
management and administration.
Web configuration access
You will connect to Access Point via your web browser automatically. Access Point will prompt for logon
username / password, please enter:
admin / admin
to continue machine administration.
Access Point will prompt for logon username/password, please enter:
admin
/
admin
to continue
machine administration.
The default IP address of LAN port is
192.168.1.254
. You also could open your web browser, and insert
2
Summary of Contents for N-WAP
