LEGRAND N-WAP, User Manual

Page: 28 / 65

- 28 -
IP Filtering
Entries in this table are used to restrict certain types of data packets from your local network to Internet
through the Gateway. Use of such IP filters can be helpful in securing or restricting your local network.
Enable Port Filtering Check to enable Port Filtering function.
Port Range
Enter the beginning of the range of port numbers used by the service. If
the service uses a single port number, enter it in both the start and finish
fields.
Protocol
Select the protocol (TCP, UDP or Both) used to the remote system or
service.
Comment You may key in a description MAC address.
Apply Changes
After completing the settings on this page, click Apply Changes button to
save the settings.
Reset
Click Reset button to restore to default values.
Current Filter Table
Shows the current Port Forwarding information.
Delete Selected Click Delete Selected button to delete items which are selected.
Delete All Click Delete All button to delete all the items.
Reset
Click Reset button to reset.