LEGRAND N-WAP, User Manual

Page: 19 / 65

- 19 -
DHCP Client
Connections which use dynamic IP address assignment.
Static IP Connections which use static IP address assignment.
PPPoE
Connections which use PPPoE that requires a user
name and password.
PPTP
Connections which use
a Point-to-Point Tunneling Protocol
(PPTP) connection.
WAN Access Type
L2TP
Connections which use
a Layer2 Tunneling Protocol (L2TP)
connection.
Attain DNS Automatically
Select to attain DNS automatically from your ISP.
Set DNS Manually
Select to specify your own preferred DNS Server IP address.
The DNS 2 or DNS 3 is optional. You can enter the secondary and the
third DNS Server’s IP address as an alternative of DNS 1.
Clone MAC Address
Your ISP may require a particular MAC address in order for you to
connect to the Internet. This MAC address is the PC’s MAC address that
your ISP had originally connected your Internet to. Type in this section to
replace the WAN MAC address with the MAC address of that PC.
Enable uPNP Check to enable the uPNP function.
Enable IGMP Proxy Check to enable the IGMP Proxy function.
Enable Ping Access on
WAN
Check to enable the Ping Access on WAN function.
Enable Web Server
Access on WAN
Check to enable the Web Server Access on WAN function.
Enable IPsec pass
through on VPN
connection
Check to enable the IPsec pass through on VPN connection
function.
Enable PPTP pass
through on VPN
connection
Check to enable the PPTP pass through on VPN connection
function.
Enable L2TP pass through
on VPN connection
Check to enable the L2TP pass through on VPN connection function.
Enable IPv6 pass through
on VPN connection
Check to enable the IPv6 pass through on VPN connection function.
Apply Changes
After completing the settings on this page, click Apply changes button
to save the settings.
Reset Click Reset to restore to default values.