- 61 -
Chapter 8
Route Setup
Dynamic Route
Dynamic routing performs the same function as static routing except it is steadier. Dynamic routing
allows routing tables in routers to change as the possible routes change. There are several protocols
used to support dynamic routing including RIP and OSPF.
Enable Dynamic Route
Check the box to enable the Dynamic Route function.
NAT
Network Address Translation (NAT) selects to enable or disable
this function.
Transmit
Select to enable or disable RIP protocol for transmit.
Receive
Select to enable or disable RIP protocol for receive.
Static Route
To set static routers, enter the settings including route IP address, route mask, route gateway and the
8
Summary of Contents for N-WAP
