background image

Catalogue number(s):  0 463 00/06/12/18/19/21/22/23 

0 463 28/29/30/33/34/35/41/42/43

19" LCS

2

 freestanding cabinets

Technical data sheet: F01424EN/01

Updated on: 24/10/2014

Created on: 21/02/2012

20/31

CONTENTS

7. CABLE MANAGEMENT 

(continued)

7.4 Vertical cable manager 

(continued)

7.4.2 Features
- Set of 2 panels
- For fixing on 19" uprights and framework
- Ability to adjust the depth of the 19" uprights retained
- Feedthroughs: 174 x 50 mm usable
-  Supplied with 8 flexible brushes and 8 stiff brushes (black polyamide 

fibres)

-  Supplied with 10 cable management rings, usable cross-section 

4070 mm

2

 (Cat. No. 0 465 42)

-  Supplied with 9 cable ties with tightening indicator:  

3 x Cat. No. 0 331 94,  
3 x Cat. No. 0 331 95 and 3 x Cat. No. 0 331 96

-  Supplied with screws
- Overall panel dimensions: 1878 x 108 mm
- Panels 1.5 mm thick steel
- Polyamide rings
- Black RAL 9005

7.5 Cable ties

7.5.1 Cable ties with tightening indicator
Cable ties with tightening indicator are wide ties with a smooth inner 
surface for optimum protection of cables. They incorporate a warning 
system to prevent over-tightening: fusible crescent-shaped pins snap 
one after the other and act as visual and audible indicators.

Hooks hold the excess strap in place.
The ties are released by pinching the head of the tie and can be re-
used.

- Tensile strength: > 100 N
- Fire resistance: UL 94 HB
- Black high impact PBT

7.5.2 Self-locking cable ties
Self-locking cable ties are repositionable textile ties that do not 
damage cables.

- Tensile strength: > 220 N
- Fire resistance: UL 94 V2
-  Double-sided textile with "loops" on one side and "hooks" on the other

Cat. No.

Width (mm)

Length (mm)

Tightening Ø (mm)

Max.

Min.

0 331 94

15

180

35

15

0 331 95

15

225

50

35

0 331 96

15

320

80

50

Cat. No.

Colour

Width (mm)

Length (mm)

Max. tighte-

ning Ø (mm)

0 331 84

Black

16

150

35

0 331 85

Red

16

150

35

0 331 86

Green

16

150

35

0 331 87

Black

16

300

80

0 331 88

Red

16

300

80

0 331 89

Green

16

300

80

8. VERTICAL EXTENSION

The set of 2 vertical extension uprights Cat. No. 0 464 81 increases 
the capacity of 42U 800 mm wide 19" LCS

2

 freestanding cabinets by 

12 U, giving a total capacity of 54U.

The extension, mounted on either side of 19" uprights, has 6 x 2U 
positions for mounting 19" equipment vertically (panels, 19" PDUs, 
etc.).

The cable management rings are plastic and radiate out to provide 
optimum protection for cords (maintain the bending radius). Each ring 
clips on horizontally or vertically:

Features
- Set of 2 uprights
-  For fixing on 19" uprights and framework (top, bottom and central)
- Ability to adjust the depth of the 19" uprights retained
-  Positions for 19" equipment: usable area 450 x 90 mm, perforations 

9.5 x 9.5 mm

-  Supplied with 8 cable management rings, usable cross-section 

4070 mm

2

 (Cat. No. 0 465 42)

- Supplied with screws
- Overall dimensions of upright: 1878 x 108 mm
- Uprights 1.5 mm thick steel
- Polyamide rings
- Black RAL 9005

 

0 464 81

x 2

42U

800

 

Summary of Contents for LCS2
































Reviews: