LEGRAND LCS2, Manual

Page: 13 / 31

Catalogue number(s): 0 463 00/06/12/18/19/21/22/23
0 463 28/29/30/33/34/35/41/42/43
19" LCS
2
freestanding cabinets
Technical data sheet: F01424EN/01 Updated on: 24/10/2014 Created on: 21/02/2012
13/31
CONTENTS
6. PLINTHS (continued)
6.1 Freestanding cabinet plinths (continued)
6.1.1 Presentation (continued)
The following is required to create a plinth:
- The correct plinth kit for the width of the cabinet (corner
solid front and rear traps)
- The correct set of 2 solid side traps for the depth of the cabinet
(2 sets for a 200 mm high plinth)
W
H
D
Set of 2 solid side traps (mm)
H = 100 D = 600
Cat. No. 0 464 54
D = 800 Cat. No. 0 464 56
D = 1000 Cat. No. 0 464 58
H = 200 D = 600 2 x Cat. No. 0 464 54
D = 800
2 x Cat. No. 0 464 56
D = 1000 2 x Cat. No. 0 464 58
Plinth kit (mm)
H = 100 W = 600
Cat. No.
0 464 50
W = 800 Cat. No.
0 464 51
H = 200 W = 600 Cat. No.
0 464 52
W = 800 Cat. No.
0 464 53
W
D
Ventilated trap Trap with brushes
W/D = 600 Cat. No. 0 464 60 Cat. No. 0 464 62
W/D = 800 Cat. No. 0 464 61 Cat. No. 0 464 63
The solid traps can be replaced by:
- Either a ventilated trap for natural ventilation
- Or a trap with brushes for cable entry on one side of the plinth
These special traps, also 100 mm high, are supplied singly.
6. PLINTHS (continued)
6.1 Freestanding cabinet plinths (continued)
6.1.1 Presentation (continued)
If cabinets are joined together directly, their plinths can be joined
together mechanically (screws not supplied).
Cross bars
Cat. No. For depth (mm)
0 476 93 600
0 476 94 800
0 476 95 1000
U-shaped cable trays
Cat. No. Internal width x height (mm)
0 464 69
200 x 54
0 464 70 400 x 54
The plinths can be equipped with cross bars. Fixed between 2 corner
blocks, they can be used for clamping cables and, in a 200 mm high
plinth, for fixing a U-shaped cable tray.
0 476 93/94/95