46
Press key pad to scroll down the screen and check the UPS settings. The LCD display will show in
consequence between Drawing Q1(buzzer)
Drawing R1(Self-test)
Drawing S1(Bypass Voltage
Windows)
Drawing T(Output Frequency Synchronization Window)
Drawing U(Inverter Output
Voltage)
Drawing V1(UPS Operation Mode)
Drawing W(Output Voltage Micro Tune Value)
For only Keor S 6-10kVA;
Drawing X(UPS Id) Drawing Y(Parallel function status).
* It shows buzzer is “On”.
* It shows buzzer is “Off”.
* It shows self-test is NOT “on”.
* It shows self-test is “on”.
Q1
Q2
R1
R2
9.1
. UPS Default Data and Special Function Execution
After UPS completely starts up, press FUNCTION (10) key pad to change the LCD display screen to
drawing Q1.
9. Operating Procedures
