LEGRAND EMS CX3, Technical Manual, Page: 62 / 98

60
MOUNTING
■ CX³ EMS communication rail:
The communication rail is available in 3
lengths (18, 24, 36 modules) so it can be
clipped onto any DIN rail.
No cutting or sawing required.
The communication rail clips onto 2 DIN
rail models: 7.5 or 15 mm thick.
Simply clip the communication rail onto a
15 mm thick DIN rail.
Clipping the communication rail onto a 7.5
mm thick DIN rail. This involves removing
one of the tabs; slide the spacer to remove
it, and replace the end.
DO NOT THROW
AWAY
The tabs should then be replaced.
The communication rail should be clipped onto DIN rails of the same length.