1.13
/ ETHERNET INTERFACE
By selecting
Enable VLAN
, you can activate
802.1q VLAN trunking on the uplink Ethernet
interface.
The default value is
Disable VLAN
, which will
not use any VLAN tagging on the uplink
interface.
In order to achieve a sufficient security level,
VLANs should be used to isolate traffic when
several network names (SSIDs) are activated
on the same radio.
Selecting
Enable User Port
activate the front
Ethernet port.
Associate to VLAN
: If the front Ethernet port
is associated to a VLAN you can restrict the
traffic from/to the front Ethernet port to a
specific VLAN ID or to the native VLAN.
After changing settings on this page, click the
Apply
button to validate your changes and
click the
Save
button to save your changes
for future reboots.
18
USER GUIDE FOR LEGRAND DU
AL
B
AND WIRELESS A
CCESS POINT
