Page
89
301 Fulling Mill Road, Suite G
©Copyright 2012 by Legrand,
Middletown, PA 17057
Inc All Rights Reserved.
(800)-321-2343
www.onqlegrand.com
4.
I want to build a WEB Server on the LAN, what should I do?
1)
Because the WEB Server port 80 will interfere with the WEB management port 80 on the
Router, you must change the WEB management port number to avoid interference.
2)
To change the WEB management port number: Log in to the Router, click the “
Security
”
menu on the left of your browser, and click "
Remote Management
" submenu. On the
"
Remote Management
" page, type a port number except 80, such as 88, into the "Web
Management Port" field. Click
Save
and reboot the Router.
Figure A-8 Remote Management
Note: If the above configuration works, remotely access the Router by typing
192.168.40.254:88 (the Router
’s LAN IP address: Web Management Port) in the
address field of the Web browser.
3)
Log in to the Router, click the “
Forwarding
” menu on the left of your browser, and click the
"
Virtual Servers
" submenu. On the "
Virtual Servers
" page, click
Add New…
, then on the
“
Add or Modify a Virtual Server
” page, enter “80” into the blank next to the “
Service Port
”,
and your IP address next to the “
IP Address
”, assuming 192.168.40.200 for an example,
remember to
Enable
and
Save
.
Figure A-9 Virtual Servers
Figure A-10 Add or Modify a Virtual server Entry
192.168.40.200
