Page
27
301 Fulling Mill Road, Suite G
©Copyright 2012 by Legrand,
Middletown, PA 17057
Inc All Rights Reserved.
(800)-321-2343
www.onqlegrand.com
establish your connection as soon as you attempt to access the Internet again. If you wish to
activate
Connect on Demand
, check the radio button. If you want your Internet connection to
remain active at all times, enter “0” in the
Max Idle Time
field. Otherwise, enter the number of
minutes you want to have elapsed before your Internet connection terminates.
Connect Automatically -
Connect automatically after the Router is disconnected. To use this
option, check the radio button.
Connect Manually -
You can configure the Router to make it connect or disconnect manually.
After a specified period of inactivity (
Max Idle Time
), the Router will disconnect from your Internet
connection, and you will not be able to re-establish your connection automatically as soon as you
attempt to access the Internet again. To use this option, click the radio button. If you want your
Internet connection to remain active at all times, enter "0" in the
Max Idle Time
field. Otherwise,
enter the number in minutes that you wish to have the Internet connecting last unless a new link
is requested.
Caution
: Sometimes the connection cannot be disconnected although you specify a time to
Max Idle
Time
because some applications are visiting the Internet continually in the background.
Click the
Save
button to save your settings.
Note:
If you don't know how to choose the appropriate connection type, click the Detect button to
allow the Router to automatically search your Internet connection for servers and protocols.
The connection type will be reported when an active Internet service is successfully detected
by the Router. This report is for your reference only. To make sure the connection type your
ISP provides, please refer to the ISP. The various types of Internet connections that the Router
can detect are as follows:
PPPoE - Connections which use PPPoE that requires a user name and password.
Dynamic IP - Connections which use dynamic IP address assignment.
Static IP - Connections which use static IP address assignment.
The Router cannot detect PPTP/L2TP/BigPond connections. If your ISP uses one of these
protocols, then you must configure your connection manually.
