LEGRAND DA2154 User Manual Download Page 72

Page: 72 / 100

Page

301 Fulling Mill Road, Suite G

Middletown, PA 17057

(800)-321-2343

www.onqlegrand.com

Figure 4-66 Bandwidth Control Rules List



Description

This is the information about the rules such as address range.



Egress bandwidth -

This field displays the max and mix upload bandwidth through the WAN

port, the default is 0.



Ingress bandwidth -

This field displays the max and mix download bandwidth through the WAN

port, the default is 0.



Enable -

This displays the status of the rule.



Modify -

Click

Modify

to edit the rule. Click

Delete

to delete the rule.

To add/modify a Bandwidth Control rule, follow the steps below.

Step 1:

Click

Add New…

shown in Figure 4-66, and you will see a screen as shown in Figure 4-67.

Step 2:

Enter the information like the screen shown below.

Figure 4-67 Bandwidth Control Rule Settings

Step 3:

Click the

Save

button.

Summary of Contents for DA2154




































































































Search results

Summary of Contents for DA2154

Reviews:

LEGRAND DA2154, User Manual, Page: 72 / 100

Search results

Summary of Contents for DA2154

Reviews: