Owner’s Manual of DA2131-V1
A
- 50 -
4.4.6 WPS
This section will guide you to add a new wireless device quickly to an existing network by
WPS
(Wi-Fi
Protected Setup)
function.
Step 1.
Choose menu “
WPS
”, you will see the next screen.
Figure 4-32 WPS Setup
The page includes the following fields:
Object
Description
WPS
Select
Enable
or
Disable
the Wi-Fi Protected Setup function. Then click
Apply
button to take effect function after change.
Step 2.
To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between
wireless adapter and Router using either Push Button Configuration (PBC) method or PIN method.
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I.
By Push Button Configuration (PBC)
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC) method, you
can add it to the network by PBC with the following two methods.