LEGRAND DA2131-V1A Owner'S Manual Download Page 24

Page: 24 / 69

Owner’s Manual of DA2131-V1

- 18 -

c. PPPOE Connection

If your ISP provides a PPPoE connection, select

PPPoE

option. And enter the following parameters.

Figure 4-4

Step 1. PPPOE

The page includes the following fields:

Object

Description

User Name/Password

Enter the User Name and Password provided by your ISP. These fields are
case-sensitive.

Verify Password

Fill in the password again for verification.

Operation Mode



Keep Alive:

Keep the PPPoE connection all the time. Please also

configure the Redial Period field.



On Demand:

Please configure the Idle Time field. When time is

up, the PPPoE connection will disconnect. The connection will re-

connect when any outgoing packet arise.



Manual:

Let user connect the PPPoE connection manually.

Sometimes the connection cannot be terminated although you specify a time to Idle
Time, since some applications are visiting the Internet continually in the background.

Summary of Contents for DA2131-V1A






































































Search results

Summary of Contents for DA2131-V1A

Reviews:

Related manuals for DA2131-V1A

Brands by name

Popular brands

LEGRAND DA2131-V1A, Owner'S Manual

Search results

Summary of Contents for DA2131-V1A

Reviews:

Related manuals for DA2131-V1A

Brands by name

Popular brands