Owner’s Manual of DA2131-V1
A
- 5 -
Chapter 2
Physical Installation
Physical Installation Steps
2.1 Preparation before Installation
2.1.1 Professional Installation Required
Please seek assistance from a professional installer who is well trained in Wireless data product installation and
knowledgeable in the local regulations.
2.1.2 Safety Precautions
1.
To keep you safe and install the hardware properly, please read and follow these safety precautions.
2.
If you are installing the DA2131-V1
A
for the first time, for your safety as well as others’, please
seek
assistance from a professional installer who has received safety training on the hazards involved.
3.
Keep safety as well as performance in mind when selecting your installation site, especially where there
are electric power and phone lines.
4.
When installing the DA2131-V1
A
, please note the following things:
Do not use a metal ladder;
Do not work on a wet or windy day;
Wear shoes with rubber soles and heels, rubber gloves, long sleeved shirt or jacket.
5.
When the system is operational, avoid standing directly in front of it. Strong RF fields are present when
the transmitter is on.
2.1.3 Installation Precautions
To avoid damage to the DA2131-V1
A
while you are installing it, please read and follow these
installation precautions.
1.
Users MUST use a proper and well-installed surge arrestor with the DA2131-V1
A
; otherwise, a random
lightening strike could easily cause fatal damage to the product.
EMD (Lightning) DAMAGE IS NOT
COVERED UNDER WARRNTY.
2.
Users MUST use the “Power cord & PoE Injector” shipped in the box with the DA2131-V1
A
. Use
of
other options may cause damage to the product.
3.
Users MUST power off the DA2131-V1
A
first before connecting any external antenna to it
. Do not
switch from built-in antenna to the external antenna from WEB management without physically attaching
the external antenna onto the device first; otherwise, damage might be caused to the DA2131-V1
A
.
