Installation Instructions
PTS
5
5.
At approximately the desired viewing height (4” of adjust-
ment), align the four mounting holes of the top assembly with
four mounting holes of the post assembly (see Figure 5).
6.
Loosen the Nylock nuts securing the bottom of the single
upright spacer to the bottom stud of the upright post (see Fig-
ure 3), align top assembly, and tighten Nylock nuts.
7.
Using four 5/16-18 X 5/8” button head cap screws, secure the
top assembly to the post assembly (see Figure 5).
FIGURE 5. BACK TO POST
Mounting
Holes
