2
Installation Instructions
PTS
INSPECT THE UNIT BEFORE INSTALLING
WARNING: Watch for pinch points. Do not put your fingers
between movable parts.
1.Carefully inspect the 25-PTS for shipping damage. If any damage
is apparent, call your carrier claims agent and do not continue
with the installation until the carrier has reviewed the damage.
NOTE:
Read all instructions before starting installation.
2.
Lay out components to ensure you have all the required parts
before proceeding (see Figure 1):
1 Base Plate with the following installed:
2 Square Bumpers
2 Hemisphere Bumpers
1 Edge Guard
1 Upright Post
1 Top Assembly
1 Face Plate
1 Latching Flag
1 Nylon Washer
1 10-24 Nylock Nut
1 Metal Mounting Bracket
1 10-24 Screw
4 Square Bumpers
1 Single Upright Spacer
2 Nylock Nut
3 Washer, .Nylon, 38” I.D.
2 Flat Washer, SAE, 3/8”
8 5/16-18 X 5/8” Button Head Cap Screws
4 5/16-18 Nylock Nuts
