Installation Instructions
PTS
1
IMPORTANT WARNINGS AND PRECAUTIONS!
WARNING:
A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION:
A
CAUTION
alerts you to the possibility of damage or destruction of equipment if you do not follow the corre-
sponding instructions.
•
WARNING: Improper installation can result in serious personal injury! Make sure that the structural members can
support a redundant weight factor
five times
the total weight of the equipment: if not, reinforce the struc-
ture before installing the 2 5-PTS.
•
WARNING: Be aware also of the potential for personal injury or damage to the unit if it is not adequately mounted.
•
WARNING: The installer is responsible for verifying that the surface the 2 5-PTS is placed on will safely support the com-
bined load of all attached components or other equipment
.
•
WARNING: The weight of the display placed on the 2 5-PTS must not exceed 100 lbs.
(45.36 kg), the maximum load capac-
ity of the 2 5-PTS
.
•
WARNING: Watch for pinch points. Do not put your fingers between movable parts.
•
CAUTION:
Check the unit for shipping damage before you begin the installation.
NOTE: Hardware for attaching this unit to the wall is not supplied.
TOOLS REQUIRED FOR ASSEMBLY
• Phillips Head Screwdriver (#2)
• Allen Wrench Set
• Socket set with extension
• Open End Wrench Set
NOTE: Other tools may be required depending on the
method of installing the mount on the wall.
CONTENTS
INSPECT THE UNIT BEFORE INSTALLING ............
2
25-PTS-2000 ASSEMBLY .............
.................................
4
MOUNT THE DISPLAY .............................................
6
REMOVE THE DISPLAY ...........................................
6
