![LEGRAND Bticino MyHOME HOMETOUCH 3488/0 672 59 User Manual Download Page 88](http://html1.mh-extra.com/html/legrand/bticino-myhome-hometouch-3488-0-672-59/bticino-myhome-hometouch-3488-0-672-59_user-manual_1871116088.webp)
HOMETOUCH
User manual
88
Replacing the HOMETOUCH
If you need to replace the HOMETOUCH installed in your system, you must use this procedure.
1. Remove the HOMETOUCH to be replaced and connect the new one, then press continue.
2. Touch to end the procedure.
On entering the section a warning screen appears.
Note
: this procedure allows you to recover all the settings in the replaced HOMETOUCH, via the
connection to the WiFi network.
HOMETOUCH firmware update (only if connected to the same Wi-Fi network of the HOMETOUCH)
When a new firmware is released you will be sent a notification on your smartphone, or you can update
your HOMETOUCH firmware at any time by accessing this section.
1. Touch to download the update.
2. Touch to install it.
On entering the section, if an update is available, a key will be displayed to download it, otherwise
the version currently in the HOMETOUCH appears.
At the end of the installation you can display the firmware version installed in your HOMETOUCH.
Connected video internal unit
Remove the video internal unit from the
plant and replace it with the new one.
Make sure that the video internal unit and
the smartphone are connected to the same
Wi-Fi network with access to the internet.
REPLACE THE VIDEO INTERNAL UNIT
CONFIGURATION IN PROGRESS
SUCCESS
Search of the video internal unit
Please wait a few moments for the configu-
ration to be correctly completed
2
1
UPDATING THE VIDEO INTERNAL UNIT
Firmlware correctly
updated
Il videocitofono è ora aggiornato!
Last check:
2016-02-25 (HH:07:08)
UPDATING THE VIDEO INTERNAL UNIT
Firmware update
Wait for the installation to finish.
Do not switch off/use the video internal unit.
UPDATING THE VIDEO INTERNAL UNIT
New firmware available
An update is available for your video
internal unit.
The video internal unit will download
the new update..
Do you want to proceed?
UPDATING THE VIDEO INTERNAL UNIT
New firmware downloaded
The update has been downloaded.
During the installation the video
internal unit cannot be used.
Do you want to proceed?
Release notes
UPDATING THE VIDEO INTERNAL UNIT
Downloading firmware
Wait for the download to finish.
Do not switch off/disconnect the video
internal unit.
45%
1
2