6
1.
Product Overview and Setup
NOTE
:
Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. Please keep
the original package in a safe place for future use.
2-1 Rear Panel View
1.
DC connector : connects to either UPS or 2
nd
battery box
2.
DC breaker: Battery over-current protection breaker
2-2 Installation and Setup with UPS
Unpacking & Inspection
1.
Remove the battery box from the packing.
NOTE
:
The battery box is very heavy, be cautious when unpacking and lifting the unit to avoid injury.
2.
Check the inside package
Battery box unit
Quick guide
Battery connection cable x 1
Ear x 2
Screw x 8
Extended stand x 4
Selecting Installation Position
It is necessary to select a proper environment to install the unit, in order to minimize the possibility of damage to the
battery box and extend the life of the batteries. Please follow the instructions below:
1.
Keep at least 20cm (8 inches) clearance from the rear panel of the unit from the wall or other obstructions.
2.
Do not block the air-flow to the ventilation openings of the unit.
3.
Please ensure the installation site environmental conditions are in accordance with the unit’s working specifications
to avoid overheat and excessive moisture.
4.
Do not place the unit in a dusty or corrosive environment or near any flammable objects.
5.
This unit is not designed for outdoor use.
This unit can either be rack mounted or placed vertically on a desk.
Rack Installation
Battery connection cable
Ears
Screws
Extended stand