9
Battery Box 36V
Step 1 : Open the package and place the battery box on a horizontal plane.
Step 2: Remove the removable front panel part by pulling it from the lower extremity.
Step 3: Remove the metal top cover of the battery box by unscrewing 6 screws present on the two sides (3 on the right side and
3 on the left side),
3 screws on the top and 4 screws on the back side.
Step 4: Once battery box is opened, remove the battery fixing plate present on the left side by unscrewing 2 screws present.
Pull up first and then push the battery fixing plate.
NOTE
: To install the second branch of batteries, repeat the same procedure on the battery fixing plate on the right side of
battery box
Step 5: Now, it is possible to put the batteries inside following the picture below (in the following drawing is indicated the fasten
positions for the correct batteries placing).