12
Step 4: Once battery box is opened, remove the battery fixing plate present on the left side of the battery box by unscrewing the
2 screws present.
NOTE
: To install the second branch of batteries, repeat the same procedure on the battery fixing plate on the right side of
battery box.
Step 5: Now, it is possible to put the batteries inside following below picture (in the following drawing are indicated the fasten
positions for the correct batteries placing).
NOTE
: To install the second branch of batteries, repeat the same procedure on the right side of battery box.
Step 6: Use the wiring diagram in the next section of this manual to properly connect all batteries.
Step 7: Put all batteries inside with the metal plate.
NOTE
: To install the second branch of batteries, repeat the same procedure on the right side of battery box.
Step 8: Put metal top cover back to the unit. Close the frontal fixing plate and the two parts of the front panel and secure it with
screws.
Step 9: Then, connect the battery box to the UPS.