Legato Legato Networker, Recovery Manual

Page: 182 / 194

Legato NetWorker, Release 7.0
Disaster Recovery Guide
Glossary
182
G
lo
ss
ar
y
SMS An abbreviation for system management software,
which is a Microsoft-based software installation
system that allows the wide-scale, automatic
installation of software products on clients from a
single remote server.
SNMP An abbreviation for Simple Network Management
Protocol, which is a protocol that defines the
communication between a manager (sometimes called
a monitor or management station) and an object (the
item being managed). NetWorker software uses
SNMP to send messages to the administrator about
NetWorker events.
ssid See save set ID .
staging
The process of moving data from one storage medium
to another, less costly medium, and later removing the
data from its original location.
stand-alone In a cluster environment, if the NetWorker.clustersvr
file is missing at the binary location, the NetWorker
server will start in noncluster mode, also called
stand-alone mode. The stand-alone mode is
sometimes referred to as the server backing up itself.
stand-alone
device A storage device that contains a single drive for backing
up data.
storage device The hardware that reads and writes data during
backup, recovery, or other NetWorker operations.
storage node
A storage device physically attached to another
computer whose backup operations are administered
from the controlling NetWorker server.
System Reference
Manual (SRM)
console
The HP TruCluster utility used to manage cluster
nodes.
user groups In the NetWorker software, refers to configuration
resources that are used to assign users to access
control groups and to configure the privileges
associated with those groups.