Legato Legato Networker Recovery Manual Download Page 163

Page: 163 / 194

Legato NetWorker, Release 7.0
Disaster Recovery Guide

Chapter 11: Legato AAM for AIX, HP-UX, and Linux Disaster Recovery

163

4. Recover or copy the following files from the active node:

AIX

•

/usr/bin/nw_ux.lc

•

$FT_DIR/bin/envsh (envcsh for C-shell)

HP-UX

•

/opt/networker/bin/nw_ux.lc

•

$FT_DIR/bin/envsh (envcsh for C-shell)

Linux

•

/usr/sbin/nw_ux.lc

•

$FT_DIR/bin/envsh (envcsh for C-shell)

For detailed instructions on using the recover and mmrecov commands,
refer to the man pages or the Legato Command Reference Guide.

Task 5: Start the Cluster Software on Each Node

On each of the remaining nodes in the cluster:

1. Start the cluster virtual server, as follows:

cd $FT_DIR/bin

. ./envsh

./ft_startup -domain

domain_name

If the virtual server fails to start on the node because of an outdated sites
file, copy the following file from the active node:

$FT_DIR/config/

domain_name_sites

2. Run the networker.cluster script:

If you have already restored or copied the nw_ux.lc file from the active
node in step 3, answer No to the following prompt:

Do you wish to automatically add site-specific values for:

NSR_SHARED_DISK_DIR and NSR_SERVICE_ID in

/AAM_ installation_ directory

Yes or No [Yes]? no

3. Repeat steps 1 and 2 for each node in the cluster.

Summary of Contents for Legato Networker



































































































































































































Search results

Summary of Contents for Legato Networker

Reviews:

Related manuals for Legato Networker

Brands by name

Popular brands

Legato Legato Networker, Recovery Manual

Search results

Summary of Contents for Legato Networker

Reviews:

Related manuals for Legato Networker

Brands by name

Popular brands