Legato Legato Networker Recovery Manual Download Page 125

Page: 125 / 194

Legato NetWorker, Release 7.0
Disaster Recovery Guide

Chapter 6: Microsoft Cluster Disaster Recovery (Windows NT 4.0)

125

4. Install the latest service pack software on Node_B. Make sure the version

is greater than Service Pack 3.

5. If NetWorker Server is installed in Node_A as a failover server:

a. Install NetWorker server software.

b. Register the resource extension. This manages the NetWorker server

resource type in Node_B. For more details, refer to the Legato
NetWorker Installation Guide, Microsoft Windows Version.

c. On Node_B, you can choose to:

– Configure the tape devices
– Install the NetWorker client software

6. Install any NetWorker specific patches.

7. Recover all the data that belongs to Node_B. This includes the system

configuration data. For example:

•

System State

•

RepairDisk

•

Windows NT 4.0 %SystemRoot% directory

•

8. Reboot Node_B.

9. Verify that the system has been restored to its original state before the

disaster.

Summary of Contents for Legato Networker



































































































































































































Search results

Summary of Contents for Legato Networker

Reviews:

Related manuals for Legato Networker

Brands by name

Popular brands

Legato Legato Networker, Recovery Manual

Search results

Summary of Contents for Legato Networker

Reviews:

Related manuals for Legato Networker

Brands by name

Popular brands