Legato Legato Networker Recovery Manual Download Page 168

Page: 168 / 194

Legato NetWorker, Release 7.0

Disaster Recovery Guide

Recovering an Entire Cluster

168

2. Use the mmrecov command to restore the media database and resource

files.

3. Complete the recovery of the resource database. In step 2, mmrecov

recovered the resource directory to a temporary directory named res.R.
This is because the resource database cannot be overwritten while the
NetWorker software is running. To complete the recovery of the resource
database:

a. Stop the NetWorker resource group using the SMIT utility.

b. Mount the shared disk containing the nsr directory.

c. Save a copy of the existing resource database, as follows:

mv /nsr/res /nsr/res.orig

d. Place the recovered resource database files into the res directory, as

follows:

mv /nsr/res.R /nsr/res

e. Unmount the shared disk containing the nsr directory.

f. Restart NetWorker resource group using the SMIT utility.

4. Use the nsrck -L7 command to restore the indexes.

5. Use the recover command to recover the initialization directories.

Summary of Contents for Legato Networker



































































































































































































Search results

Summary of Contents for Legato Networker

Reviews:

Related manuals for Legato Networker

Brands by name

Popular brands

Legato Legato Networker, Recovery Manual

Search results

Summary of Contents for Legato Networker

Reviews:

Related manuals for Legato Networker

Brands by name

Popular brands