3
| Mounting Instructions
above the table. The box can be positioned closer
to the table using the extender.
(If necessary) Fix the extender to the ceiling
mount and set the required distance. Mount the
Tovertafel at the end of the extender and adjust
the height using the extender.
Insert the usb wifi-adapter in the usb socket on
top of the Tovertafel box. No wifi? Connect the
Tovertafel to the internet using a LAN cable.
The connection for the 220 volt power cable can
also be found on top of the box (see illustration
below)
CONTENTS
Check inclusion of all components:
•
Tovertafel box (H 34 cm, L 38
cm and W 24 cm, weight 10 kg)
•
220 volt power cable
•
Ceiling mount
•
Extender (27-57 cm)
•
Screws and plugs
•
Remote Control
•
usb wifi-adapter (if ordered)
MOUNTING
Using the screws and plugs provided, connect the
ceiling mount directly above the (dining) table.
The ideal distance from the box to the surface of
the table depends on the size of the table.
The bigger the table, the higher the box needs to
be mounted to ensure full surface coverage. For a
rectangular, 6 to 8 person dining room table the
box needs to be 150 to 250 cm
SCREWS & PLUGS
CEILING MOUNT
EXTENDER
USB
WIFI-ADAPTER
REMOTE
CONTROL
220 V
POWER CABLE
MOUNTING INSTRUCTIONS
H
L
W
Pre Installation Checklist
F
There are no obstructions on
your ceilings where you wish to
position the Tovertafel unit(s).
F
The ceiling is made of concrete,
wood or plaster capable of
holding screws for the mounts.
F
The ceiling attachment is able
to securely hold the mount on
which the 10 kilos of Tovertafel
will hang with 4 screws.
F
There is no plumbing or piping
in the ceiling at 4 cm depth. (This
depth requirement is greater if
the Tovertafel is to be recessed).
F
There is sufficient space for the
table for Tovertafel use, and
walking/wheelchair circulation
around the table, directly below
the proposed mounting place.
F
There is a power point available
or have a point installed for the
Tovertafel to connect to (connect to
power circuit not lighting circuit).
F
There are no hanging lighting fixtures
obstructing the projection field.
F
There are no smoke detectors within
a 1 metre radius – heat from the
projector may impact the detectors.
F
There is WIFI or a LAN-connection to
connect the Tovertafel for available
updates wirelessly or directly
to internet. Phone hotspot will
suffice. (Only required for updates
and uploads of new games)
F
There is a suitable table available
a lighter surface shows the colours
most clearly but woodgrain or black
also create interesting effects.
