background image

INSTALLATION SHEET

HUEDA

-Multi Zone LED Controller

INSTALLATION SHEET

HUEDA

-Multi Zone LED Color Controller

2/7

Zone Control

Dynamic Modes

RGBW Control

Color Wheel

Scroll through to nd specic color.

Power

Press to turn ON/OFF device 

H

zones

U E D A

1

2

3

TM

Three Choices of White

Brightness Control

Press to select/deselect zones 1-3

Operation Overview

Press to turn ON/OFF Red, 
Green,Blue and White color

Long press to adjust brightness 
of individual color

Long press to increase/decrease
brightness

Press to cycle through the choices of white

Long press adjusts speed of dynamic 
color changing mode.

Install in accordance with the NEC and local regulations.

Installation Overview

Ÿ

Turn power OFF at main circuit breaker and verify the power is off. 

Ÿ

Determine an accessible location for a compatible low voltage driver to be installed between the main 
breaker and DMX controller. Determine a location to install additional accessories such as DMX decoders, 
xtures etc. Ensure applicable wire is installed between all components. When choosing wire, factor in 
voltage drop, amp rating and type to prevent re or electric shock.

Ÿ

Remove the existing wall plate and switch. Pull switch from identify wires and disconnect from switch.

Ÿ

Remove existing switch box from wall and install the included DMX controller switch box. Additional tools 
may be required to t DMX controller switch box in the wall.

Ÿ

Make wiring connections. See ‘Wiring Connections’ and ‘Mounting Diagram’ for additional information.

Ÿ

Replace wiring back into switch box. Mount and align DMX decoders/xtures. See ‘Setting the DMX 
Address’.

      

  

Remote Operation

Ÿ

The DMX controller can also be con also be controlled remotely via wi- with a compatible 
ios/Android tablet or mobile device using our application “HUEDA”.

Ÿ

Please see our HUEDA™ web page for application instructions.

http://www.ledworldlighting.com/product/dmx-color-controllers/hueda-led-controller/

Copyright © 2015 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.4 10/19/15

Summary of Contents for HUEDA








Reviews: