LED World HUEDA, Installation Sheet

Page: 3 / 7

3/7
Mounting Wiring Connections
DO NOT connect directly to 120VAC.
See ‘System Diagram for a general system design.
Pop off faceplate with a athead screwdriver
Install with the included DMX controller wall box.
GND
Data + Data -
Vin GND
Reset
Switch
1 2 3
From 12-24V
To DMX Decoder
or DMX xture
Setting the DMX Address
Zone 1 : Set to address ‘001’ (will be xed to address 001 – 004)
1 2 3 4 5 6 7 8 9 10
ON DIP
001 002 004 008 016 032 064 128 256
FUN
ON
OFF
Zone 2 : Set to address ‘005’ (will be xed to address 005 – 008)
1 2 3 4 5 6 7 8 9 10
ON DIP
001 002 004 008 016 032 064 128 256
FUN
ON
OFF
Zone 3 : Set to address ‘009’ (will be xed to address 009 – 012)
1 2 3 4 5 6 7 8 9 10
ON DIP
001 002 004 008 016 032 064 128 256
FUN
ON
OFF
Each DMX decoder or DMX xture need to be addressed correctly so the controller can distinguish between
each one. To pair a DMX decoder or xture to a specic zone of the controller (1-3), set each decoder/xture
to one of the following addresses
Each zone of the controller is xed with 4 DMX
addresses to control the 4 channels:
Ch1 – Red, CH2 – Green, CH3 – Blue, CH4 – White or X
INSTALLATION SHEET HUEDA ™ -Multi Zone LED Controller
INSTALLATION SHEET
HUEDA ™ -Multi Zone LED Color Controller
WARNING!!!
Never install the HUEDA
™
Controller in with other high voltage Junction Box as there is a risk of shock
hazzard! National Electric Code requires electrical conductors to be separated by a barrier within the box or in a
separate box!. Install only in the provide Junction box
Copyright © 2015 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.4 10/19/15