background image

Led Lenser®

*

3.  Safety Notes

EN Operating instructions P6X_V.01 | 7/31/2014  

 

10

• 

Never use new and used batteries/battery packs together.

• 

Only use high-quality batteries of the same type.

• 

Always change all batteries at the same time.

ATTeNTION

RISK OF SHORT-CIRCUITING

In order to avoid the risk of a short-circuit when recharging:

• 

 Do not touch the charging contacts with damp or metal objects. 

• 

If need be, clean the charging contacts.

• 

Only recharge flashlight/battery packs in dry rooms.

ATTeNTION

MALFUNCTIONING OF THe FLASHLIGHT

Always check the flashlight for functionality prior to use and, to be 

on the safe side, carry a replacement lamp and sufficient replacement 

batteries with you. If the flashlight does not function or does not 

function correctly, proceed as follows:

• 

 Check whether the batteries/battery packs have been inserted with the 

poles (+/-) the correct way round and are fully charged.

• 

 Check the flashlight or battery/battery pack contacts and clean if 

necessary.

What to do:

 

 To use all the functions again, insert new batteries or recharge the bat

-

tery packs.

Disposal / environmental protection

ATTeNTION

DISPOSAL/ReCYCLING
Flashlights and used batteries/battery packs may not disposed of 

in the household or residual waste. They must be disposed of in 

accordance with national legal requirements.

The materials are recyclable according to their labeling.

 Reuse of the materials makes an important contribution toward 

environmental protection.

Therefore:

• 

 Submit flashlights in to a local collection point for the recycling of 

electrical and electronic devices.

• 

 Submit used batteries/battery packs to a local battery collection point or 

anywhere where batteries/battery packs are sold.

• 

 Batteries, lithium batteries in particular, and battery packs may only be 

disposed of when discharged.

• 

Separate the packaging materials and dispose of correctly.

Summary of Contents for P6X



















Reviews: