Led Lenser®
*
EN Operating instructions P6X_V.01 | 7/31/2014
12
5.1 Inserting Batteries (only the boxed
version)
In the "boxed" version of the flashlight, the included batteries
must first be inserted. These have already been inserted in the
"blister" packaging version.
1. To insert the batteries, unscrew the end cap ③.
CAUTION
RISK OF eXPLOSION
Always insert the batteries according to the
(+/-) markings as there is otherwise a risk of
damages or even exploding batteries.
2. Insert the included batteries ⑤ with the plus pole (+) first
into the battery compartment ②.
3. Screw the end cap ③ back into place.
5.2 Switching the Flashlight On or Off
The flashlight is operated by pressing the push button on
the end cap. The pushbutton can be engaged for constant
illumination; just a gentle activation can be used to create
flashes, for example, to send signals or warnings.
1. To switch the flashlight on firmly press the On/Off
pushbutton ④ in the end cap ③ and engage.
→
The push button engages with an audible "click".
→
The flashlight is now constantly lit.
2. To switch the flashlight off press the On/Off pushbutton
④ in the end cap ③ again and release.
→
The pushbutton unlocks with an audible "click".
→
The flashlight is no longer lit.
3. To create light signals, press the On/Off pushbutton ④ in
the end cap gently and, if need be, hold.
5.3 Quickly Focusing the Flashlight
The beam of the flashlight can be focused by sliding the head
of the flashlight ① with one hand.
1. Switch flashlight on.
2. Hold the flashlight with the hand and grip the head ①
with thumb and index finger.
3. Push the head ① backward/forward until the required
beam width has been achieved.
5. Operation
X
AA
AA
LED LENSER®* P6X
+ -
+ -
3
5
2
3
2
1
1
4
1 x
2 x
3 x
