Operator's Manual
WSta-OM-E RevA
65
The USB connector on the Front Panel is also used
for
USB memory sticks
. USB memory sticks are plug-
and-play supported and no special setting is needed
for their use.
o
Make selections as desired and press the
Done
(to commit)
or
Cancel
option button and the main
Util
menu is shown.
Output Setup
- Press this option button and an additional menu is
shown.
Use these additional output controls for the following:
o
Load/HighZ
- Use this option button to select either
Load
or
HighZ
for your waveform output.
o
Normal/Invert
- Use this option button to select either
Normal
or
Invert
for your waveform output.
o
Sync
- Press this option button and an additional menu is
provided where you can turn the State of your
synchronization
On/Off
and use the
Channel
option button
to send the synchronized signal to CH1 or CH2.
Make selections as desired and press the
Done
(to commit)
or
Cancel
option button and the main
Util
menu is shown.
All standard output functions (except DC and Noise) have a
corresponding Sync signal sent through the
Sync Out
connector on the
Back Panel
(on page 14). This can be
disabled on certain settings as follows:
Summary of Contents for WaveStation 2012
