LeCroy WaveStation 2012, Operator'S Manual

Page: 81 / 101

Operator's Manual
WSta-OM-E RevA
79
Note : It's important to realize that a scalar representation of the
waveform data is sent. Adjust the amplitude, frequency, and offset as
desired.
Minimum and Suggested WaveStation Software System
Requirements
M
INIMUM
S
YSTEM
R
EQUIREMENTS

Operating system Microsoft™ Windows® XP, Windows® Vista 32
Bit Version, Windows® 7 32 Bit Version.

Pentium® IV processor.

1 Gb RAM.

150 Mb hard disk available space for software set‐up.

Video resolution 800 X 600.

USB 2.0 connections.
Installing the WaveStation PC Drivers and
Software
In order to use WaveStation with your PC, you must install the drivers
and software in the following order:
1. First, turn on your WaveStation and configure the rear
USB connector for
USBRAW as explained in Main Utility
Operations (on page 62). The setting can quickly be made at
Utility → IO Setup → USB Setup → USBRAW .
2. With your PC turned on, connect the 1 m USB 2.0 Type A to Type B
Cable from the rear of WaveStation to a USB connector on your
PC.
3. Your PC eventually should indicate that it's installing/looking for
the driver. If shown, you can close pop-ups or screens shown from
the connection of the USB cable.

On your PC, right-click Computer or My Computer and
select Manage . The Computer Management screen is
shown.

Select Device Manager under System Tools on the left
side of the Computer Management screen.