LeCroy WaveStation 2012, Operator'S Manual

Page: 37 / 101

Operator's Manual
WSta-OM-E RevA
35
For more information on getting to this point, see Navigating Interfaces,
Adjusting Parameters, and Making Selections (on page 16).
Note : Pulse Operation menu selections and parameters include
Frequency/Period , Amplitude/HLevel , Offset/LLevel , PulWidth/Duty ,
and Delay . The parameters for Frequency/Period , Amplitude/HLevel ,
and Offset/LLevel are carried out the same way as done when Creating
a Sine Wave (on page 28).
Setting the PulWidth/Duty (Pulse Width) and Delay is done as follows:
PulWidth/Duty
With the Pulse waveform and the PulWidth/Duty operation button
pressed once to select PulWidth , a Pulse waveform is shown on the
Waveform Display and the Pulse Width is shown on the Waveform
Detail dialog.
Positive Pulse Width is the time from the first rising edge to the first
falling edge. Similar for Negative Pulse Width .
PLEASE NOTE THE FOLLOWING :

Press an adjacent Operation button to select a desired Unit (unit
interval) for your entry.

Provide your desired PulWidth amount using the Digital Input
Front Panel Controls (on page 27).