LeCroy WaveStation 2012, Operator'S Manual

Page: 57 / 101

Operator's Manual
WSta-OM-E RevA
55

Cycles/Infinite - This control is only available when NCycle is
selected from the third operation button. Press this operation
button to highlight and select either
Cycles or Infinite amounts for
your burst waveform(s). With Cycle selected, provide a desired
amount of repetitions (from 1 to 50,000) using the detail dialog.
Infinite generates a continuous waveform that only stops on a
trigger event.
PLEASE NOTE THE FOLLOWING :

The period time increases if necessary to allow the specified
number of cycles in a burst as previously mentioned in the
NCycle/Gated bullet.

An external or manual trigger is required in order to
activate an infinite burst.

Delay - This control is only available when NCycle is selected from
the third operation button. With Delay selected, you can specify a
span of time between the trigger input and the start of the N-Cycle
burst using the detail dialog. The minimum delay amount is 240
ns.

Polarity - This control is only available when Gated is selected
from the third operation button. Press this operation button to
select either
Positive or Negative polarity for your gated signal.