CS-D508 Closed-loop Stepper Drive User Manual
Motion Control Products Ltd. Tel.: (+44) 01202 599922
Important Notice
Read this manual carefully before any assembling and using. Incorrect handling of products in this manual can result in
injury and damage to persons and machinery. Strictly adhere to the technical information regarding installation
requirements.
All rights are reserved. No part of this manual shall be reproduced, stored in retrieval form, or transmitted by any means,
electronic, mechanical, photocopying, recording, or otherwise without approval from Leadshine. While every
precaution has been taken in the preparation of the book, Leadshine assumes no responsibility for errors or omissions.
Neither is any liability assumed for damages resulting from the use of the information contained herein.
This document is proprietary information of Leadshine that is furnished for customer use ONLY. Information in this
document is subject to change without notice and does not represent a commitment on the part of Leadshine.
Therefore, information contained in this manual may be updated from time-to-time due to product improvements, etc.,
and may not conform in every respect to former issues.
Motion Control Products Limited is the official UK distributor of China Leadshine Technology Co. Ltd.
Record of Revisions
Revision
Date
Description of Release
1.0
September, 2017
Initial Release
3.1
October, 2018
Firmware and PC software update to version 3.1
