Leader LV 5800, Instruction Manual

Page: 45 / 93

2. ETHERNET
43
2.4.6 LV 58SER40A Commands (DIGITAL AUDIO)
● UNIT SETUP LV 58SER40A (DIGITAL AUDIO)
Command Parameter1 Parameter2 Description
INPUT Sets all rear BNC connector to input.
OUTPUT Sets all rear BNC connector to output.
SYS:UNIT:EXT_BNC 1,2,3,4 (*1)
? Queries all rear BNC connector setting.
ON Detects the level over error.
OFF Does not detect the level over error.
SYS:UNIT:ERROR:LEVEL_OVER 1,2,3,4
? Queries the presence of detecting the
level over error.
ON Detects the clip error.
OFF Does not detect the clip error.
SYS:UNIT:ERROR:CLIP 1,2,3,4
? Queries the presence of detecting the
clip error.
1 to 100 Sets the the detection period of the clip
error. (sample) SYS:UNIT:ERROR:CLIP:DURATION 1,2,3,4
? Queries the the detection period of the
clip error. (sample)
ON Detects the mute error.
OFF Does not detect the mute error.
SYS:UNIT:ERROR:MUTE 1,2,3,4
? Queries the presence of detecting the
mute error.
1 to 5000 Sets the the detection period of the
mute error. (ms) SYS:UNIT:ERROR:MUTE:DURATION 1,2,3,4
? Queries the the detection period of the
mute error. (sample)
ON Detects the parity error.
OFF Does not detect the parity error.
SYS:UNIT:ERROR:PARITY 1,2,3,4
? Queries the presence of detecting the
parity error.
ON Detects the varidity error.
OFF Does not detect the varidity error.
SYS:UNIT:ERROR:VARIDITY 1,2,3,4
? Queries the presence of detecting the
varidity error.
ON Detects the CRC error.
OFF Does not detect the CRC error.
SYS:UNIT:ERROR:CRC 1,2,3,4
? Queries the presence of detecting the
CRC error.
ON Detects the code violation error.
OFF Does not detect the code violation error.
SYS:UNIT:ERROR:CODE 1,2,3,4
? Queries the presence of detecting the
code violation error.
*1 Enter the unit number in which LV 58SER40A is installed.
● AUDIO LV 58SER40A (DIGITAL AUDIO)
Command Parameter1 Description
AUDIO - Sets the audio display.