Leader LV 5800, Instruction Manual

Page: 17 / 93

2. ETHERNET
15
● UNIT SETUP (ERROR SETUP5) LV 58SER01A (SDI INPUT)
Command Parameter1 Parameter2 Description
ON Detects the level errors.
OFF Does not detect the level errors.
SYS:UNIT:ERROR:LEVEL 1,2,3,4
? Queries the presence of level error
detection.
-51 to 766 Sets the upper limit (mV) of luminance
level. SYS:UNIT:ERROR:LEVEL:RUMA:UPPER 1,2,3,4
? Queries the upper limit of luminance
level.
-51 to 766 Sets the lower limit (mV) of luminance
level. SYS:UNIT:ERROR:LEVEL:RUMA:LOWER 1,2,3,4
? Queries the lower limit of luminance
level.
-400 to 399 Sets the upper limit (mV) of chroma
difference level. SYS:UNIT:ERROR:LEVEL:CHROMA:UPPER 1,2,3,4
? Queries the upper limit of chroma
difference level.
-400 to 399 Sets the lower limit (mV) of chroma
difference level. SYS:UNIT:ERROR:LEVEL:CHROMA:LOWER 1,2,3,4
? Queries the lower limit of chroma
difference level.
● WFM LV 58SER01A (SDI INPUT)
Command Parameter 1 Description
WFM - Displays the video signal waveform.
ON Displays CH1.
OFF Does not display CH1
WFM:CH1
? Queries the presence of CH1 display.
ON Displays CH2.
OFF Does not display CH2
WFM:CH2
? Queries the presence of CH2 display.
ON Displays CH3.
OFF Does not display CH3
WFM:CH3
? Queries the presence of CH3 display.
ON Sets overlay display.
OFF Sets parade display.
WFM:OVLAY
? Queries the display mode.