Leader LV 5800, Instruction Manual

Page: 21 / 93

2. ETHERNET
19
● VECTOR LV 58SER01A (SDI INPUT)
Command Parameter1 Description
VECTOR - Displays vector waveforms.
● VECTOR - INTEN/SCALE LV 58SER01A (SDI INPUT)
Command Parameter1 Description
-128 to 127 Sets the intensity of the vector waveform. VECTOR:INTEN:VECTOR
? Queries the intensity of the vector waveform.
WHITE Sets the waveform display color to white.
GREEN Sets the waveform display color to green.
VECTOR:COLOR
? Queries the waveform display color.
-8 to 7 Sets the intensity of the scale. VECTOR:INTEN:SCALE
? Queries the intensity of the scale.
ON Displays the IQ axis.
OFF Does not display the IQ axis.
VECTOR:SCALE:IQ
? Queries the presence of displaying the IQ axis.
WHITE Sets the scale color to white.
YELLOW Sets the scale color to yellow.
CYAN Sets the scale color to cyan.
GREEN Sets the scale color to green.
MAGENTA Sets the scale color to magenta.
RED Sets the scale color to red.
BLUE Sets the scale color to blue.
VECTOR:SCALE:COLOR
? Queries the scale color.
● VECTOR - GAIN LV 58SER01A (SDI INPUT)
Command Parameter1 Description
CAL Sets the gain of the waveform to a constant value (×1).
VAR Sets the gain of the waveform to variable (×0.200 to ×2.000).
VECTOR:GAIN:VAR
? Queries the gain setting of the waveform.
0.200 to 2.000 Sets the variable gain value of the waveform. VECTOR:GAIN:VAL
? Queries the variable gain value of the waveform.
X1 Sets the gain factor of the waveform to ×1.
X5 Sets the gain factor of the waveform to ×5.
IQ Sets the gain factor so that the IQ signal is positioned at the
circumference.
VECTOR:GAIN:MAG
? Queries the gain factor of the waveform.
● VECTOR - LINE SELECT LV 58SER01A (SDI INPUT)
Command Parameter1 Description
ON Enables the line select function.
OFF Disables the line select function.
VECTOR:LINE_SELECT
? Queries the line select function.
FIELD1 Sets the selection range of the line select to field 1.
FIELD2 Sets the selection range of the line select to field 2.
FRAME Sets the selection range of the line select to frame.
VECTOR:LINE_FIELD
? Queries the selection range of the line select.
Example)
1 to 1125
(Depending on
the format) Sets the line of the line select. VECTOR:LINE_NUMBER
? Queries the selected line of the line select.